Posts Tagged ‘Plumbing’

Manhattan Plumbing Installation Guide: How to Replace the Kitchen Sink Spray Nozzle

Monday, January 23rd, 2012

Replacing an old or broken spray nozzle in the kitchen sink in your Manhattan home is relatively easy and shouldn’t require many tools. Depending on the style of your old nozzle, you may need to replace the hose, but most models are universal and will work with your current hose. If the package tells you that you need to upgrade your hose, try installing the new nozzle before you buy a hose.

Some brands will also include the tools you will need to complete the project. Don’t buy pipe thread if you are not replacing the hose. All you will need is a pair of needle nose pliers and maybe a screwdriver.

1. Remove the Old Nozzle Head

You don’t necessarily have to turn off the water if you are just replacing the nozzle on your sprayer hose, but it would be a good idea to avoid accidentally turning on the faucet, which will cause the water to shoot out of the hose while the nozzle is off. Simply unscrew the old nozzle and look for a small metal clip that holds the rest of the housing in place (your new nozzle should have the same part and where to locate it in the instructions).

You will probably need needle nose pliers to pull this clip off. It looks like a horseshoe and will be located below the washers. Once you remove the clip, you can take off the base of the old nozzle. Look at how it is assembled as you remove it; your new one will have basically the same construction, so seeing how it is attached will help you install the new nozzle.

2. Unscrew the Mounting Nut and Replace Nozzle Base

The mounting nut is the large nut located under the sink just below the nozzle. It keeps the base of the nozzle in place. Hold down the base of the nozzle as you unscrew the mounting nut. This may be tricky depending on the design of your sink. You might want to get someone to hold the base in place so that you have better access to the mounting nut.

Once you unscrew the nut from the base, you can guide the hose through the opening in the sink to take slide off the old nut and replace it with the new mounting nut. Next, put the hose back through the hole and install the new base by screwing it into the new mounting nut.

3. Install New Nozzle

If you unscrew the top part of the nozzle from the bottom where the metal clip is attached (your instructions should label them with letters), you may find the washers inside or packaged separately with the clip. Slide the bottom part of the nozzle onto the hose and install the metal clip on the bottom ridge of the plastic part of the hose with the pliers. Next put the plastic washer around the tube, and then the rubber one. Then, simply screw on the top part of the nozzle and test it for leaks.

Don’t tighten the nozzle too much, because the parts are delicate and could break with too much pressure. If you can’t fit the nozzle on without leaks, you may need a different style hose.

When you are making any home improvements for your Manhattan home, feel free to call the experts Standard Plumbing, Heating & Air Conditioning to ask questions and get advice.

Tags: , , ,
Posted in Plumbing | Comments Off

How a Garbage Disposal Works: A Tip from Kansas

Wednesday, November 23rd, 2011

Garbage disposals are becoming more and more prevalent in homes across Kansas. So the chances are pretty high that you have one in your home. Garbage disposals definitely make getting rid of food waste easier. Instead of scraping all those plates and dishes into the garbage first, you can simply flush it all down the drain, run the garbage disposal and it magically disappears.

But do you really know what is happening when you turn on that wonderful garbage disposal and where all your food is really going? The truth is that a garbage disposal is not a particularly complicated piece of equipment. There are some variations, but in general your garbage disposal has a motor attached to rotating blades which are located in a chamber below your sink that is attached to your drain.

When you put food down the garbage disposal and turn it on, these blades shred the food into small enough pieces that it can pass safely through your drain pipes and out into the sewer system. The shredded food then runs with the water back into your main drainage system and passes out of your house.

This is a pretty simple operation, but there are some things you should be aware of if you use a garbage disposal in your home. First of all, it is important to never reach into the garbage disposal when it is running. If you need to reach in, make sure the unit is switched off. It is even a good idea to shut off the power to the garbage disposal entirely so that it cannot be turned on by accident while your hand is in there.

You may notice a foul odor coming from the garbage disposal after a period of time too. This is common and easy enough to fix, but you will have to get down into the garbage disposal to get rid of the smell. The smell simply comes from residue of the food you have put down the garbage disposal and that needs to be cleaned off so the smell will go away.

Again, make sure you have the garbage disposal turned off completely before you reach in to take parts out to clean them. You can also put baking soda, vinegar or half a lemon down the garbage disposal and run it in order to combat a persistent smell or to keep one from developing. And if your garbage disposal starts to malfunction, call a plumber to have it repaired.

Tags: , , ,
Posted in Plumbing | Comments Off

Plumbing Noises: A Guide from Manhattan

Monday, November 21st, 2011

Under ideal conditions, you would hear nothing from your Manhattan home’s plumbing system except the sound of running water when you turn on the tap. Unfortunately, that is not always what actually happens. In fact, your plumbing can make all types of funny and sometimes alarming noises for no reason that you can easily discern.

For instance, one common plumbing noise sounds like a hard knock or hammer blow. This usually occurs when you turn off a tap and can be rather alarming. Sometimes you can even feel the reverberation of the impact that caused the sound. But why is this happening? Usually, this “water hammer” noise is the result of the dramatic shift in pressure in the system when you suddenly stop the flow of water from a faucet.

This sudden stop creates a kind of shock wave, which then travels back through the pipes and causes the loud knocking sound that you hear. This is easily fixed with a device that is known as a water hammer arrester. These devices help to dissipate the force of the pressure shift and can keep the noise from occurring at all.

There are also all kinds of whistling, squealing and squeaking noises that your plumbing can make under certain circumstances. These types of sounds are often caused by a worn out washer somewhere along the line that is having trouble regulating the flow of water. It can be a little difficult to pin down the source of these noises sometimes, especially if they occur no matter which faucet is turned on. But with a little hunting and trial and error you can usually track down the source.

Rattling sounds are also common and generally occur when your water pipes are not well secured to a rigid surface. If this is the case, the force of the water running through the pipes can cause the pipe to vibrate, creating the sound you hear as it bangs against whatever solid surface is nearby. For problems like this, simply securing the pipes in place better can put an end to all of your rattling issues.

Tags: , ,
Posted in Plumbing | Comments Off

How Much Water Does a Leaky Faucet Waste in Manhattan?

Wednesday, August 17th, 2011

A leaky faucet, in Manhattan or anywhere, is obnoxious for more than one reason. It is incessant, it represents a problem that will probably only grow worse, and it can cost you money on your water bill. Beyond all of that, it wastes a lot of water, putting undue stress on the environment. But, how much water does a leaky faucet actually waste? It may not seem like much, but when added up over a period of time, that leaky faucet’s impact can be fairly substantial.

Okay, so a single drip every couple seconds may not seem like a lot of water. But, think about it this way. If you let your faucet drip every day, twenty four hours a day, it is definitely going to add up. Imagine what would happen if every faucet in your home was dripping or every faucet in your neighbourhood. It would not seem like such a small amount of water anymore.

In terms of how much water is actually wasted, it is impossible to tell for certain. After all, every drop of water from a faucet is a different size and falls at a different rate. But, for the most part the water coming from a faucet (according to the US Geological Survey) is between 1/5 and 1/3 of one milliliter. Using those calculations and 1/4 of a milliliter as an average, the USGS estimates that roughly 15,140 drips from a faucet equals one gallon of water.

It may not seem like much. After all, fifteen thousand drops is a LOT of drops. But, if your faucet dripped once every second every day, all day, it would only take four and a half hours to reach one gallon. Every day you would waste 5 gallons of water or 2,082 gallons per year. That is 10% of the average water used by a standard 3.5 gpf toilet on a daily basis. Now, imagine what happens if you have more than one drippy faucet, or if your bathtub leaks which will drip more water at a time or if the leak is larger than the average size.

In short, the cost of a leaky faucet may not seem like much, but as time passes, it can really add up and if it is not repaired, the cost will only grow as the leak gets bigger and potentially new leaks start in other faucets of your home. Do not let it drip forever – take action now and cut down on the environmental impact you have, as well as your bill.

If you have more questions about how to reduce your water use, contact your local plumber.

Tags: , ,
Posted in Plumbing | Comments Off

How Can I Prevent Clogged Drains in Kansas?

Friday, August 5th, 2011

One of the most frustrating plumbing issues any home owner in Kansas will encounter is a clogged drain. Not only are clogged drains a nuisance, they are largely avoidable, so it becomes that much more frustrating when it happens since you know that you could have taken preventative measures long before the problem occurred. To help stop your drains from clogging in the future, here are some useful preventative tips:

  • Set Cooking Grease Aside – Cooking grease is thick, viscous and clings to the sides of almost all types of pipes. So, instead of pouring it down your sink and hoping it clears out on its own, pour it into a coffee can and set it aside. There are a number of places where you can recycle old grease.
  • Flush Garbage Disposals – When you use your garbage disposal, it is imperative that you flush cold water through the system at the same time. Without water to flush the food particles through the pipes, anything ground up in the disposal will become stuck and with the application of grease or other food particles can easily become a thick clog.
  • Pour Boiling Hot Water Down the Pipes – At least once a week it is a good idea to pour 2-3 quarts of boiling water down your sinks and bathtub to loosen any pre-clogs that have formed. Things like soap, grease, food, and hair can all be dislodged by an application of hot water on a regular basis.
  • Taking Care with Your Toilet – A toilet is not designed to flush anything that will technically fit down the hole. Even for paper products that seem to be flushable, take care in what goes into the toilet bowl. Paper towels, garbage, and wrappers should not be flushed or they are likely to cause clogs.
  • Use Strainers – Install strainers on all of your sinks, including the ones in your bathroom. A simple strainer will catch excess bits of food, hair, and other grime that has a habit of falling down the drain and getting flushed along with the dishwater or during a shower.

With care, your drains will remain clog free and never require the services of a snake or a plumber. If you do get past the point of no return, do not panic just yet – there are a number of steps you can take
to remove a small clog without chemicals or professional help. However, if the clog refuses to budge or begins to backup, know when to call a plumbing professional.

Tags: , ,
Posted in Plumbing | Comments Off

Pipe Inspection Camera: When to Use One

Monday, July 11th, 2011

For plumbers today, pipe inspection cameras are a huge aide. In the past, it was often very difficult to determine the location of a blockage or a leak, or indeed if one even existed at all. But now with this great modern equipment, it is much easier to get a thorough picture of the exact state of a pipe system and the nature of a potential problem.

These types of inspection cameras are especially useful when a clog is located underground or when an underground leak is suspected. Many types of plumbing problems can have multiple possible causes. But with pipeline inspection cameras, you can know for sure quickly exactly what type of problem you are dealing with.

For instance, even if you know that an underground pipe is leaking, it can be next to impossible to figure out exactly where the leak is. But to fix the leak you will have to unearth the damaged section of pipe and repair it. If you cannot pinpoint the leak precisely, you will be forced to unearth a large section of pipe. This takes a long time and causes unnecessary, although hopefully temporary damage to your yard as well.

However, if you can determine exactly where the leak is, you can dig up only the affected portion of pipe. This saves a lot of time and labor and it also means that you can limit the disruption the work causes in your yard. And the best way to find a leak like this is to use a pipe inspection camera to get a look at the inside of the pipe before you ever begin digging.

You do not need to wait for an emergency situation to develop to make use of a pipe inspection camera either. This technology is also extremely useful during annual drainage and sewer maintenance visits to help ensure that there are no unnoticed problems lurking below the surface. It is perfectly possible that one of your pipes is getting close to cracking but has not done so yet. The repairs can be a lot simpler if you catch this type of problem early, and that is exactly what a pipe inspection camera makes possible.

Pipe inspection cameras are also useful during maintenance visits because they allow technicians to determine which parts of your system need the most work. They can see where the larger buildups are and get the job done quicker overall than they could if they were operating blind.

Tags: , , ,
Posted in Plumbing | Comments Off