Posts Tagged ‘Plumbing Repair’

Manhattan KS Plumbing Repair Question: What’s Causing that Leaky Toilet?

Monday, April 2nd, 2012

Most homeowners have been there. You go into the bathroom in the morning, still a little bleary-eyed from sleep, and are shocked to find that the floor is wet. Then your realize your toilet is leaking.

The tricky part is determining where that leak is coming from in order to fix it. Try these simple methods to diagnose the problem with your Manhattan plumbing quickly.

 Sweating Toilet

One possibility is that your toilet is not leaking at the base itself, but that the toilet is sweating and the liquid is pooling at the base. It is easy enough to make this distinction; just check the toilet throughout the day to see if there is any moisture on the outer surface. If so, your toilet is sweating.

“Sweating” is caused by humid air condensing on the cold porcelain. The only way to fix this problem is to insulate the toilet.

 Bad Tank Seal

Another possibility is a bad seal. There are two main seals on your toilet that can leak: the tank seal and the wax seal.

To check for a bad tank seal, put some food coloring in the tank. You don’t need a lot, just enough to noticeably change the color of the water. Then, let the toilet sit without being used for a few hours. If the water on the floor is colored, then the tank seal on your toilet needs to be replaced.

 Bad Wax Seal

The other seal that can leak is the wax seal that is located at the actual base of the toilet. Diagnosing this problem is similar to the tank seal method above.

Again, add food coloring, this time to the water in the bowl. Then flush and repeat. After adding coloring the second time, let the toilet sit like in the steps above. If the colored water starts collecting around the base of the toilet after a few hours, the wax seal needs to be replaced.

Once you have determined the cause of the leaking, you can properly fix it. Some home owners are savvy enough to do toilet repairs on their own, but if that doesn’t sound like your cup of tea, call in a Manhattan plumber. Fixing a toilet seal is a relatively quick job and worth the expense.

If you are having any problems with your bathroom plumbing, give Standard Plumbing, Heating & Air Conditioning a call today!

Tags: , , ,
Posted in Plumbing | Comments Off

Kansas Plumber’s Guide: How to Test for Water Leaks

Wednesday, January 11th, 2012

A water leak can be a big problem in your Kansas home. Not only does it increase your bill – pouring water out of pipes that you now have to pay for – but it puts your home and its foundation at risk. Steady water flowing into concrete under your home is incredibly dangerous if left unchecked. Here are some quick tips to check for a leak if you suspect there might be a problem.

Your First Clue

The first clue that there might be a leak in your home is the water meter. If it suddenly starts to rise much faster than normal, you probably have a leak. You use the same amount of water on most days for showers, dishes and laundry. If the meter goes up by double each day, that water must be going somewhere. Many meters will even have a marker on them that indicates a leak (a red flag that you are using too much water and it’s probably a leak).

Finding the Leak

If you notice your water meter rising when all of your water using appliances are off (or the little warning meter is going off), you have a leak – let’s find it.

Start by turning off the main shut off valve to your home. Make sure your shut off valve is working properly by running a faucet after the valve is closed to see if water still comes out. If the leak indicator or meter is still moving after the shutoff valve is closed, the leak is before the shutoff valve, but after the meter. If it’s not moving, the leak is somewhere in your home, after the shutoff valve.

From here, look for signs of water damage or dampness throughout your home (and possibly outside). Most of the time, an indoor leak will manifest somewhere – either in a dripping ceiling or a damp spot on the carpet.

If no such evidence presents itself, look outside for water. Damp spots on your lawn on dry days are a sure sign as well. If you cannot find any signs of water leakage on or around your property, it may be time to call in a Kansas professional to take a closer look.

Tags: ,
Posted in Plumbing | Comments Off

Manhattan Plumbing Question: How Can I Stop My Toilet from Running?

Monday, January 9th, 2012

Nothing is more obnoxious than the constant tinkling sound of a running toilet in your Manhattan home. When your toilet starts pouring water through at a record rate, it is time to take a peek inside and make sure everything is working properly. Luckily, most of the time, a running toilet is very easy to fix. It may only be that the tank flap or the diaphragm needs adjustment. Here are some quick tips to help you diagnose and repair that running toilet and get back the peace and quiet of your bathroom once and for all.

  1. Going In – Open the tank of your toilet take a close look at the various parts. First, check the ball cock – the valve linked to the large plastic ball that floats on top of the water in your tank. If the noise is coming directly from the valve or you can see obvious issues, the ball cock likely needs to be replaced. Sometimes, it needs only basic cleaning, which you should do first before running out to buy a new part. It also possible that the tank flap is having issues. Look for a small cone in the hole at the base of the tank. Press down on it to see if the sound stops. If it does, the tank flap likely needs replacement.
  2. Turn off the Water Supply – Before doing any more, turn off your toilet’s water supply. Do not worry – you should not need to go hunting for the valve. It is most often located next to the toilet on the floor of your bathroom.
  3. Replacing Your Parts – When replacing any parts for a toilet, always remove the old part first and bring it with you to the hardware store. Almost all toilets have slightly different parts that may not match up universally. By having the part you need, you can give it to an expert in toilet repair and they can quickly find the right replacement.
  4. Careful Replacement – Most of the time, replacement simply involves unscrewing or removing the part and placing a new one in place. However, if you own a low flush toilet or a specialty design that does not have the same parts or layout of a traditional tank-based toilet, you may need the help of a professional to avoid any unwanted accidents or issues in the replacement process.

Ideally, the entire process should only take the better part of a couple hours, including the time it takes to go to the hardware store and purchase your replacement part. And if your run into any problems, call your Manhattan plumber.

Tags: , ,
Posted in Plumbing | Comments Off

Plumbing Noises: A Guide from Manhattan

Monday, November 21st, 2011

Under ideal conditions, you would hear nothing from your Manhattan home’s plumbing system except the sound of running water when you turn on the tap. Unfortunately, that is not always what actually happens. In fact, your plumbing can make all types of funny and sometimes alarming noises for no reason that you can easily discern.

For instance, one common plumbing noise sounds like a hard knock or hammer blow. This usually occurs when you turn off a tap and can be rather alarming. Sometimes you can even feel the reverberation of the impact that caused the sound. But why is this happening? Usually, this “water hammer” noise is the result of the dramatic shift in pressure in the system when you suddenly stop the flow of water from a faucet.

This sudden stop creates a kind of shock wave, which then travels back through the pipes and causes the loud knocking sound that you hear. This is easily fixed with a device that is known as a water hammer arrester. These devices help to dissipate the force of the pressure shift and can keep the noise from occurring at all.

There are also all kinds of whistling, squealing and squeaking noises that your plumbing can make under certain circumstances. These types of sounds are often caused by a worn out washer somewhere along the line that is having trouble regulating the flow of water. It can be a little difficult to pin down the source of these noises sometimes, especially if they occur no matter which faucet is turned on. But with a little hunting and trial and error you can usually track down the source.

Rattling sounds are also common and generally occur when your water pipes are not well secured to a rigid surface. If this is the case, the force of the water running through the pipes can cause the pipe to vibrate, creating the sound you hear as it bangs against whatever solid surface is nearby. For problems like this, simply securing the pipes in place better can put an end to all of your rattling issues.

Tags: , ,
Posted in Plumbing | Comments Off

Why Does My Garbage Disposal Leak, Grind Poorly and Make a Lot of Noise? A Question From Jackson

Friday, September 30th, 2011

It is definitely convenient to have a garbage disposal in your Jackson home’s kitchen. They make doing the dishes and getting rid of food waste much easier. But just like any other appliance or piece of equipment in your home, your garbage disposal can sometimes develop a problem that causes it to leak or perform inadequately.

Leaky garbage disposals are certainly no fun to deal with. There are several reasons why garbage disposals can develop a leak. There could be an inadequate amount of putty or sealant at the joint where the garbage disposal connects to the drain pipe from the sink. A leak can also spring from that area simply because the bolts holding the two pieces together are not securely tightened.

The point where food and waste exit the garbage disposal and move into the main drainage system is another spot prone to developing leaks. These types of leaks are similar to those that occur between sink drain and garbage disposal and can be remedied in the same way.

In general, the key to dealing with a garbage disposal leak is to locate the source. This will most often be where two pipes come together or where the pipes join the unit. However, as your garbage disposal ages, it is more prone to developing cracks in the body of the unit itself. When this happens, leaks can develop anywhere there is a seam or break in the body of the garbage disposal itself. With this type of leak, the only thing to do is to replace the garbage disposal with a new one.

Leaks are not the only problems that can develop in a garbage disposal either. Sometimes you may notice that your garbage disposal is making an unusual amount of noise when it is turned on. This is often the result of something getting in there that should not have, so you should not continue to run your garbage disposal. Turn off all power to the unit and see if you can reach or see into the garbage disposal to determine what is causing the problem.

If your garbage disposal is not grinding well even though it seems to be rotating fine, you may not be running enough water into it when it is turned on. The water is necessary to facilitate the grinding process, so be sure to keep it going at all times. If that does not solve the problem, you may need to have a professional come out and take a look at your system to find out what is going on.

Tags: , , ,
Posted in Plumbing | Comments Off

How Can I Get Better Flow from My Faucets? A Tip From Manhattan Kansas

Friday, August 19th, 2011

Most of us realize that a drain can get clogged or that the pipes in our Manhattan home might require extra repairs every now and then, but rarely do we realize that when the faucet is not providing a strong, steady flow of water, it is likely because of a clog in the actual faucet. If you are suffering from low flow in your faucets or worse, sputtering and clogging, here are some tips to help fix the problem.

Why it Happens

The reason that so many faucets now have problems related to clogging is that they have been changed and redesigned over the years to reduce water flow. Older faucets would pour ridiculous amounts of water through the drain – not at all good for the environment. Today, aerators and other technology advancements greatly reduce the amount of water used, but also tend to cause these types of clogs.

Checking Your Aerator

The easiest way to fix a slow flowing faucet is to check the aerator tip for unwanted sediment. Despite filtration of tap water, over time small bits of sand, dirt, and other sediment can and will build up in the aerator. That sediment should be cleaned out of the tip of the aerator at least once a month to keep it from slowing the flow of water.

If a water main breaks somewhere or a problem occurs in the water supply outside of your home, this type of sediment might start to build up more rapidly and cause immediate clogs in your faucet. Other things that might build up include pieces of pipe or flux from plumbing joints that break free and enter the water supply. None of it poses a health problem, but it can be frustrating when it gets into your faucets and blocks the water supply.

Valve Cartridge

If the aerator is not the problem it may be in the valve cartridge. To fix this, you will need to replace the part. Each faucet can be very different, so you should refer to your owner’s manual (many of which are online) for how to take this part out of the faucet assembly. When you go to the hardware store, be sure to take the valve cartridge with you so you can get the exact piece you need for replacement.

The easiest way to avoid a clog in your faucets is to be careful with any repairs you make. While a water main break is not something you can control, you can control how the water supply is affected when someone does repairs on your home’s plumbing. Leave faucets open outside, turn the main valve back on slowly and check your faucet immediately after the repair to ensure no sediment gets clogged in the assembly.

Tags: , ,
Posted in Plumbing | Comments Off

How Much Water Does a Leaky Faucet Waste in Manhattan?

Wednesday, August 17th, 2011

A leaky faucet, in Manhattan or anywhere, is obnoxious for more than one reason. It is incessant, it represents a problem that will probably only grow worse, and it can cost you money on your water bill. Beyond all of that, it wastes a lot of water, putting undue stress on the environment. But, how much water does a leaky faucet actually waste? It may not seem like much, but when added up over a period of time, that leaky faucet’s impact can be fairly substantial.

Okay, so a single drip every couple seconds may not seem like a lot of water. But, think about it this way. If you let your faucet drip every day, twenty four hours a day, it is definitely going to add up. Imagine what would happen if every faucet in your home was dripping or every faucet in your neighbourhood. It would not seem like such a small amount of water anymore.

In terms of how much water is actually wasted, it is impossible to tell for certain. After all, every drop of water from a faucet is a different size and falls at a different rate. But, for the most part the water coming from a faucet (according to the US Geological Survey) is between 1/5 and 1/3 of one milliliter. Using those calculations and 1/4 of a milliliter as an average, the USGS estimates that roughly 15,140 drips from a faucet equals one gallon of water.

It may not seem like much. After all, fifteen thousand drops is a LOT of drops. But, if your faucet dripped once every second every day, all day, it would only take four and a half hours to reach one gallon. Every day you would waste 5 gallons of water or 2,082 gallons per year. That is 10% of the average water used by a standard 3.5 gpf toilet on a daily basis. Now, imagine what happens if you have more than one drippy faucet, or if your bathtub leaks which will drip more water at a time or if the leak is larger than the average size.

In short, the cost of a leaky faucet may not seem like much, but as time passes, it can really add up and if it is not repaired, the cost will only grow as the leak gets bigger and potentially new leaks start in other faucets of your home. Do not let it drip forever – take action now and cut down on the environmental impact you have, as well as your bill.

If you have more questions about how to reduce your water use, contact your local plumber.

Tags: , ,
Posted in Plumbing | Comments Off