Posts Tagged ‘Heating Repair’

Warning Signs of a Broken Furnace: Some Pointers from Kansas

Friday, November 18th, 2011

How do you know when your furnace is “on the fritz?” There are warning signs of a broken furnace and some are recognizable – but not all. A broken furnace not only deprives your Kansas home of heat and comfort, it also can be deadly, too.

Let’s look at some of the warning signs.

Each year, hundreds of people die and many more are injured from the most common household poison: carbon monoxide. This colorless and odorless poisonous gas comes from several sources and the furnace is the most common source of all; more precisely a broken or malfunctioning furnace. Carbon monoxide is a result of incomplete combustion of a fossil fuel, which is when a fuel does not burn correctly or completely. In a furnace, carbon monoxide gas comes from a poorly operating burner or a cracked heat exchanger. A properly tuned and maintained furnace greatly reduces the risk of carbon monoxide poisoning.

Since carbon monoxide gas is colorless and odorless, it can go undetected. It can make people sleepy and create flu-like symptoms. Sometimes a person may fall asleep and never wake up. But there are warning signs. Drowsiness, vomiting, or flu-like symptoms are a warning sign. Regularly scheduled maintenance of your furnace by a qualified heating and cooling professional and installation of carbon monoxide detectors can reduce the risk of falling ill to carbon monoxide gas.

Another warning sign is a higher energy bill. Sometimes you can’t detect a problem right away because, like carbon monoxide, there may be no obvious signs. Higher utility bills can be a sure sign of a furnace that is working too hard and running more than usual. This may be a result of clogged or dirty air vents, or dirty filters. If your monthly bills are higher than those of the previous year, it may not just be because gas prices are higher.

There are other warning signs of a broken furnace, too. The most obvious is the failure of your furnace to bring your home up to the desired thermostat settings or to maintain an even temperature. Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. This can be because of a poor blower or a clogged furnace filter. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.

A broken or cracked gas line can emit odors and can cause a furnace to malfunction, too.

Don’t take a chance of losing heat and comfort this winter. At the first possible warning sign, call your local heating professional for a heating system tune-up.

Tags: , , ,
Posted in Heating | Comments Off

What to Do if Your Heating System Breaks: A Tip from Manhattan

Wednesday, November 16th, 2011

What if the heart of your Manhattan home’s heating system – the furnace – stops working? The warm air that used to flow from your vents has been replaced by a chilly draft. It isn’t time to panic, but it is time to take action. Before you do anything, determine why the furnace stopped working. It may be something as simple as a tripped circuit breaker in your electrical panel. Check the circuit breakers first.

The pilot light in your furnace may have blown out. It can be re-lit if you follow the directions in your furnace owner’s manual. You can find answers on how to re-light a pilot light on the Internet, too.

If the shutdown has not been caused by an electrical or pilot light failure, there is still no need to panic. But another obvious question is: did you pay your last gas bill? Maybe you had a shutoff notice and either ignored it or forgot about it.

Now that you are convinced that the furnace has pooped out, here are some things you should do. First, find the name of a qualified heating and cooling professional. If you already use a heating contractor, contact them and schedule a service call.

While you are waiting for help to arrive, ensure that everyone is safe and accounted for. Make sure pets are nearby and protected from the cold, too. What you don’t want to do is use any appliance to keep you warm that is not designed to keep you warm, like a stove. If you have electric space heaters or propane heaters, carefully locate them in a well vented room (windows open a bit or portable fans circulating air). You don’t want any build-up of gases from fossil burning appliances, gases which could contain deadly carbon monoxide.

Huddle up everyone into a room and break out lots of blankets. You may even want to make an “adventure” of this – find a movie to watch and pop up a bunch of popcorn.  If your waiting time is more than 24 hours, you might want to call up a friend or relative and make arrangements to spend the night with them.

The main thing to remember is not to panic. Most qualified heating contractors, knowing the circumstances, will send out a repair person in a matter of minutes or within one or two hours. Just remember to avoid keeping warm by using unvented heating devices.

Tags: , , ,
Posted in Heating | Comments Off

How to Replace a Thermostat: A Guide from Manhattan

Wednesday, October 26th, 2011

There are a lot of common household tasks that do-it-yourselfers can handle beyond changing light bulbs or replacing a fuse. One of those is changing out a thermostat. The reasons for replacing a thermostat can vary from making an upgrade to changing out a thermostat that is not working right – or at all. Whatever the reason, the task is pretty simple and require s very little time and very few tools.

Let’s set the stage.

The materials you will need are the replacement thermostat, wire connectors, electrical tape (optional), needle nose pliers, and a screwdriver.

Here are the steps:

  1. Turn off electrical power to the existing thermostat. You can do this by flipping a breaker switch or removing a fuse from your home’s electrical panel. This would be a good time to make a note of the circuit’s location, writing the circuit number on the panel door or using a sticker.
  2. Remove the cover from the existing unit. You should be able to locate the screws that hold it to the wall mounting plate. Remove the screws and pull the unit away from the wall and mounting plate. Be careful not to touch the electrical wires together on the thermostat.
  3. Disconnect the wiring. Carefully remove the electrical wiring from the unit and keep the wires apart. You might want to tape the bare ends and also ensure that the wires don’t fall back through the wall. If the wires are not color coded, mark each one and which terminal they were removed from. Remove the mounting plate.
  4. If you are using a new mounting plate, make sure it fits over the existing hole and then pull the wires through the opening of the plate. Make sure the mounting plate is secured to the wall with the proper screws.
  5. Now match the wires to the terminals on the new thermostat. The wires are usually color-coded but if not, make sure you attach the right wires to the corresponding numbered terminals on the next thermostat. A green wire, which operates the furnace fan blower, is connected to the “G” terminal. The white wire operates the heater and attaches to the “W” terminal. The yellow wire operates the air conditioner and connects to the “Y” terminal. Use a wire nut to secure the wires and keep them apart from other wires. Ignore any other wires coming out of the wall as they are not necessary and may have been added by the original builder for other purposes.
  6. Carefully move the wires back into the wall as you line up the new thermostat on the mounting bracket. Install the new bracket and secure the thermostat to the bracket.
  7. Turn your power back on and check your thermostat by setting the temperature high or low, to engage the furnace or air conditioner.

This simple procedure can be done in less than 10 minutes. But if you have any doubts and want greater peace of mind, call a professional heating and cooling contractor to perform the installation.

Tags: , , , ,
Posted in Energy Savings, Heating | Comments Off

Furnace Fan Doesn’t Run? Why Is That? What Should You Do? A Guide from Kansas

Friday, October 21st, 2011

There are several reasons that a furnace fan might stop working at one point or another. While many of these do require Kansas professional’s attention, there are probably some things you can check on your own before you go and call in the pros. After all, if you can address the problem on your own, it will at least save you from having to pay a technician to come out.

The first thing to check when your furnace is running but the fan isn’t turning is whether or not the fan is actually switched on. Certain models of furnaces have a separate switch to turn the fan on and off. While there is probably no reason that you would want to turn off the fan by itself, it’s worth taking a look just in case. If that really is the problem, you’ll be up and running and back to dealing with better things in no time.

If that’s not the problem, you might try looking to see if any wires leading to the fan are loose or the fuse is blown. If the fan has no power, of course, it won’t be able to work but the rest of the furnace likely would work just fine as long as it doesn’t run on electricity as well.

Of course, the problem very well may be beyond your power to solve on your own. Don’t despair though. Even though you need to call in a professional, that doesn’t mean that the problem will be expensive to fix. In fact, it may be as simple as replacing your thermostat or the motor for the fan itself.

Just because a fan isn’t working doesn’t mean that you’re going to be paying an arm and a leg to have work done on your furnace. If you can’t easily discover the problem on your own, however, or if you’re not comfortable inspecting this type of equipment at all, you’re generally better off just calling in an expert and letting them do the dirty work for you. Paying for simple furnace fan repairs is definitely preferable to having to pay someone to fix the fan and the stuff you broke yourself while trying to fix the fan on your own.

Tags: , , , ,
Posted in Heating | Comments Off

Common Furnace Problems in Manhattan

Wednesday, October 19th, 2011

When it comes to your Manhattan home’s  furnace, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

Tags: , , ,
Posted in Heating | Comments Off

Troubleshooting Thermostat Issues: Some Pointers From Kansas

Friday, October 14th, 2011

If your room temperature is too hot or cold in your Kansas house, what is the first thing you check? Probably the thermostat. If you are a homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in the home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Tags: , , ,
Posted in Heating | Comments Off

No Heat in Your Kansas House? Things to Check and Do

Wednesday, October 12th, 2011

In general, when your heating system stops working, you’ll need to call a professional to come out and take a look. However, before you do that, there are likely a couple of things you can check on your own to ensure that there really is a problem with the system itself.

For instance, if it’s cold in your house and your heat isn’t coming on, check to make sure that the thermostat is set to a high enough temperature that the heating system would be triggered. Particularly if this is the first really cold day of the season, it’s entirely possible that your thermostat was turned down at some point and left there. And if the thermostat isn’t turned up high enough, the heat will never come on.

Also, it’s worth just taking a second to check and make sure that the power switch on the heating system itself is actually in the proper on position. For the most part, there would be no reason for you to turn this off, but it’s always possible it could have happened in any number of ways and it only takes a second to check.

Depending on the type of fuel source your heating system uses, it’s probably a good idea to check to make sure the supply is still available as well. If you use natural gas, check to make sure that the gas line is open, but don’t try to repair it yourself if it seems to be compromised. If you find something like that, be sure to call your gas company right away.

However, if you use oil as a heat source, take a quick peek at the levels in your tank. There’s always the possibility that you used more than you thought you did or that a delivery was missed for some reason and so your heating system simply has no fuel to run on. Similarly, if your heating system runs on electricity, make sure that the fuse wasn’t blown or that it’s not just too loose to provide an adequate power supply.

If you’ve covered all of these basic troubleshooting bases, it may be time to take a closer look at the heating system itself. On just about every type of system there should be some type of reset switch or button. Follow the instructions to press this button and engage the reset process, but be sure to only try this once. If that resetting doesn’t work, it’s time to back off and call in some professional help.

Tags: , , ,
Posted in Heating | Comments Off

Common Problem Areas for HVAC Systems in Kansas

Friday, September 9th, 2011

No one wants to have to call a contractor in to inspect the HVAC system in their Manhattan home. Problems in heating or air conditioning tend to be costly and time consuming to fix. But, the longer you wait, the bigger the problem is likely to get. So, it’s important to act quickly when you suspect a problem with any of the following common sources in an HVAC system:

  • Power Lines – Your HVAC system uses a lot of electricity so if it stops working, turns off suddenly or frequently shuts down, it may be a power issue. If the system stops working at any point, check your breaker box for a blown fuse or tripped breaker. You should also check the electrical line to your HVAC system. If you see any damage from animals, weather or otherwise, call a professional immediately.
  • Gas Lines – if you have gas furnaces and appliances, gas supply problems can be a major issue for your HVAC system. There are a number of safety measures in place in a gas line system. The gas valve connecting the gas line to your furnace has as safety shutoff switch. Your home has a carbon monoxide detector. A pressure drop in the system will also cause a shutoff. So, the most common problem you would face with a gas line is that is stops providing gas, usually because there is a problem in a component. If this happens, call the gas company immediately to check your system, and of course if you smell a leak, leave the house and call the emergency line for your gas company.
  • Drains – Air conditioners have drain pipes that release the condensed water that builds up inside as they run. However, over time, that drain can clog up if it’s not properly maintained. If you have a central air conditioning unit, check the drain pan once every week or so to make sure it is draining properly. Frequently, this drain pipe will be located higher in your home so that it can drain properly away from the property. Call a professional if it continues to clog or fails to drain at all.
  • Venting – Vent problems can result in more than just stuffy air. Clogged or dirty vents are fire hazards and they can decrease indoor air quality, making it both uncomfortable and unhealthy inside. Vents and ductwork should be cleaned annually to avoid the buildup of debris and sediment. Additionally, you should do a visual inspection once a month to check for debris and vacuum the space where possible.

Most of the problems commonly associated with your HVAC system need to be checked and repaired by a professional. However, by remaining vigilant and checking them regularly, you can avoid a much bigger problem and subsequent repairs.

Tags: , , ,
Posted in Air Conditioning, Heating | Comments Off