Posts Tagged ‘Heating Installation’

Manhattan Heating Contractor Tip: Signs of an Oversized Furnace

Friday, December 16th, 2011

Most people in Manhattan, when they choose a new furnace, think that “bigger is better”. However, an oversized furnace can present just as many if not more problems than an undersized furnace. So, if you feel you may have overdone it in the past or you want to avoid making a mistake in the future, here are some signs that your furnace may be oversized.

Short Cycling

The most common sign of oversizing is short cycling. Short cycling occurs when your furnace turns on and off frequently because it reaches the thermostat setting so fast. Basically, your furnace is so powerful that it can produce what you need rapidly and then shuts off. But, because it does this, the temperature in your home is likely to cool much faster as well since the furnace isn’t on all the time.

Additionally, the on and off short cycling has a negative effect on your furnace, causing excess wear and tear on the system and eventually leading to extra repairs and in some cases early replacement.

High and Low Temperatures

When your furnace is turned on for a comfortable indoor temperature like 70 degrees F, the high and low temperature between cycles should be relatively close to that temperature. In an ideal situation, you shouldn’t even notice a fluctuation.

So, if the high temperature gets close to 75 degrees F and the low temperature is around 66 degrees F, you have a furnace much too large for the size of your home.

Furnace Room Issues

You might find that the space and exhaust given for the furnace are not sufficient either, especially if your previous furnace was replaced with this oversized unit. Backflow of a gas or oil smell or excess heat in and near your furnace room are both common signs that the furnace is much too large.

So, what should you do about your oversized furnace? If you have had that furnace for some time or just moved into a new home, it’s a good idea to have a new one installed. Have a proper load calculation done and then get a new furnace installed so you don’t have to worry about the system cycling on and off so often. If it’s a newer unit, call your technician and discuss possible options to reduce the negative effects of the miscalculation of its size.

Tags: , , ,
Posted in Heating | Comments Off

Things to Look for When Buying a Manhattan Heating System

Monday, December 5th, 2011

If you are in the market for a new or replacement heating system in Manhattan and don’t know much about heating systems, you are not alone. Many homeowners are in the same boat as you. And many of that number put their trust in their heating and cooling contractor to find the right furnace for their homes.

Before calling for an estimate, there are some things you can do to “prepare” yourself for one of the most important purchase you can make. Here is a checklist of things you should look for when buying a heating system.

  1. Know your energy alternatives. There are lots of options today when it comes to heating your home. Gone are the days when the choices were so cut and dried. Check with your heating and cooling contractor for suggestions.
  2. Know what size your furnace should be. Furnaces are not “one size fits all.” The size of the furnace is determined by its Btu (British thermal unit) rating. For example, a one-story ranch home on a crawl space requires less heating capacity than a two-story colonial with a basement, thus it would require a furnace with a smaller numbered Btu rating. A home with a great deal of heat loss through windows and doors may require various furnace sizes. And don’t forget about insulation. Insulation can affect the furnace size, too. Again, check with your heating and cooling contractor for recommendations.
  3. How much room do you need for your furnace? Some homes have mechanical rooms for furnaces and water heaters while others utilize attics, basements, or crawlspaces for furnaces. If you think you need a big furnace to heat a big home, think again. Furnace manufacturers have been downsizing their heating equipment for years, while maintaining the same heating capacities. One example are wall hung boilers, which utilize water and electric as heating sources and are installed on a wall, making the unit easy to locate and easy to service – while at the same time being off the floor and out of the way.
  4. Will your heating system be “plug and play?” New furnaces can take the place of the ones they are replacing by using the same space. But sometimes a replacement unit may need some altering to fit into an existing duct system. It is almost a given that a new plenum (the part attaching the furnace to the ductwork) will have to be fabricated. But the new furnace may also require some other modifications to an existing duct system. You should understand this ahead of time and be prepared to pay additional costs.
  5. A box is a box is a box. As a rule, most heating systems are made the same. In some cases, one furnace manufacturer may produce several different brand names. The best “brand” is the heating and cooling contractor who installs and services your heating equipment. Do your homework ahead of time and find a qualified and professional contractor. Ask friends and family for recommendations. This is may be the most important thing to look for when buying a heating system

Tags: , , ,
Posted in Heating | Comments Off

What Size Furnace is Right for My Home? A Question from Kansas

Monday, November 14th, 2011

When it comes to your Kansas home’s heating equipment, the right size is very important. If your furnace is sized correctly, you will enjoy a high level of indoor comfort, which you should. However, an incorrectly sized furnace may result in many cold spots in your home, an overworked furnace, or higher utility bills.

An undersized furnace will turn off and on frequently, which is called short cycling. Short cycling can lead to moisture in the system, causing less efficiency and damage to equipment from accumulating moisture in the heating system. The constant cycling adds to wear and tear on equipment, too. An oversized furnace may not be able to keep up with the demand for heat during the coldest days. The furnace may be constantly running and unable to keep up – adding to higher utility costs. So size really does matter when it comes to selecting the right heating equipment for your home.

But a big furnace does not mean it is right-sized. Have you ever seen a “five-way” gravity furnace? It was manufactured in the mid-1900’s and took up a lot of room – as much as half of a basement – while being extremely inefficient. The key here is efficiency. A furnace that works right is sized to the space it is heating, which does not include attics, crawlspaces, or uninsulated rooms (porches, mud rooms, etc.).

A furnace must make efficient use of its Btu’s, which is abbreviated for British thermal unit. Btu is used to measure a furnace size. Furnaces are often rated by input Btu, which is the amount of energy consumed when running. The output Btu may be different based on the system. And output Btu is the best way to select a furnace, since this is the actual heating capacity.

When sizing a furnace, the first thing to do is to determine the inside space that will be heated. If you are looking to heat your home, you can measure the square footage of each room (multiply width by length). The rooms should include bathrooms and hallways but exclude attics and crawlspaces. Add up the totals and match up the Btu output to the total square footage. If you aren’t sure of your calculations, call a qualified heating and cooling contractor.

There are many factors that go into heating a home and today’s energy efficient furnaces give homeowners many more choices. Whatever furnace you choose to purchase, make sure you do your homework and hire a qualified professional HVAC contractor to determine the best size furnace for your home.

Tags: , , , , ,
Posted in Heating | Comments Off

Is a Heat Pump Right for Your Home? A Tip from Manhattan

Wednesday, November 9th, 2011

Deciding which type of home comfort system to go with in your Manhattan home can be a difficult process to navigate. There are a ton of factors to take into account including how much you will be using the system, what type of fuel you mainly rely on and what the specific climate is like where you live.

Heat pumps are a great home comfort solution for many people but they aren’t always the appropriate choice. However, there are many benefits to going with a heat pump system, so this is certainly an option you should keep in mind as you evaluate your options.

Heat pumps work by extracting heat from the air in one place and then transferring that heat to another space. For instance, in the winter, heat pumps take heat from the outside air and pump it into your house. In the summer, on the other hand, your heat pump will be able to take heat from your indoor air and pump it back outside, thereby keeping your home cool and comfortable.

Heat pumps are also extremely energy efficient because they don’t actually have to generate the heat they pump. Unlike furnaces, which take in fuel and convert it into heat, heat pumps simply harness the heat that’s already there, making them by far the more energy efficient option.

Another benefit to heat pumps is that they maintain a more constant temperature than many other types of heating systems do. Rather than pumping in a big blast of hot air and then waiting until the temperature indoors falls below a preset level before doing it again, heat pumps provide a relatively constant stream of warm air.

The initial amount of heat is smaller than what you might be used to from a furnace, but the cumulative effect means that you’ll be able to enjoy a much more consistently comfortable indoor environment.

It is important to evaluate the climate in your area before you decide to purchase a heat pump, though. These systems are extremely effective at heating and cooling your home as long as temperatures stay above the mid-thirties.

Below that, you may need to install some type of supplemental heating in order to keep your home warm enough on those really cold days. So if you live in an area where temperatures routinely dip below freezing for large portions of the winter, a heat pump without a supplemental heating source might not be the most sensible solution for you.

Tags: , ,
Posted in Heat Pumps | Comments Off

Heat Pump Noise Considerations: A Guide from Kansas

Monday, November 7th, 2011

Whenever you’re looking into replacing your Kansas home’s heating system or installing a new one, there are many different factors you’ll have to take into consideration. The amount of noise that the system you choose will make is certainly one of these. And in addition to the amount of noise that this system will make, you’ll also want to make a note of where the unit will be placed and so where the noise will be coming from.

While you may have had to worry a bit about the noise generated by heat pumps in the past, it’s not something you’ll have to take into consideration this time around. That’s because newer heat pumps are designed to be quieter than ever, providing the same heating and cooling power with only a fraction of the noise of some earlier models.

In fact, the only part of a heat pump that really makes any noise at all is the outdoor unit. Unless this needs to be located very close to your home or to a window of a room that you use often, chances are that you won’t even hear it at all.

However, if you live very close to your neighbors or don’t have a lot of outdoor space, you may have to put the outdoor unit close to the walls of your home. Even then, though, you’ll hardly notice the noise your heat pump makes. Years of research and redesigning have produced some of the quietest heat pumps yet and that’s what you’ll be buying if you’re in the market for one of these systems now.

Newer heat pumps have been tweaked and adjusted to minimize the amount of noise-generating vibrations they produce. In fact, you’ll probably find that most of these units make no more noise than your refrigerator. They’re efficient and quiet and can keep your home comfortable all year long.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

What Is a Downflow vs. an Upflow Furnace? A Question from Manhattan

Monday, October 10th, 2011

When you go looking to buy a furnace in Manhattan, you may well be surprised by how many different elements go into making a good purchasing decision. There are simply so many different kinds of furnaces available now and they each are more appropriate for certain situations. That means that finding the one that’s right for you is less about finding the one best unit than it is about finding the one that is the best match for your particular circumstances.

This applies to the type of fuel the furnace uses, its energy efficiency, and whether it’s an upflow furnace or a downflow furnace. Energy efficiency and fuel types are probably things that you’re more or less familiar with. But what are we talking about when we classify a furnace as an upflow or downflow model?

Well, it’s pretty much what it sounds like. These terms refer to the direction the air flows as it is taken in and heated by the furnace. So in an upflow furnace, the cool air is taken in at the bottom, warmed, and then expelled at the top. A downflow furnace, on the other hand, takes in cool air at the top and expels heated air at the bottom.

While this is all very exciting, it may still not be obvious what impact this will have on your decision about what type of furnace to buy. The main thing you’ll have to think about when you’re deciding between an upflow and a downflow furnace is where the furnace will be placed in your house.

An upflow furnace is generally installed in the basement so that the heated air is directed towards the parts of the house you want cooled and so that the furnace can be appropriately vented outside of the house. On the other hand, a downflow furnace would be installed in your attic for the same reasons.

So where you want to have the furnace installed is probably the biggest thing to take into account as you’re comparing these two types of equipment. Of course, whether you pick an upflow or a downflow furnace, you’ll still have to select the appropriate AFUE, size and fuel source to best meet your needs. But making the choice between upflow and downflow can at least make it easier to narrow down your options.

Tags: , , , , ,
Posted in Heating | Comments Off

Top 8 Mistakes People Make When They Buy HVAC Equipment

Friday, September 23rd, 2011

Every year millions of homeowners buy a new HVAC system for their Randolph home. Whether for heating, cooling or air quality, they make a huge investment in a new system that will be with them for years to come. Unfortunately, many of those people make big mistakes when buying their next system, so to help you avoid doing so, here are some simple things you should not do.

  1. Ignoring Air Quality – Air quality is about more than comfort. It affects the health of everyone in your home equally. Consider it carefully when installing a new system.
  2. Avoiding Even Heating and Cooling – One room being cooler or warmer than another is not okay. It’s bad for your system and bad for your home’s comfort level. Have insulation and ductwork checked before installation of a new HVAC system.
  3. Not Upgrading Your AFUE or SEER – New systems are highly efficient. Take advantage of that by buying one with a higher AFUE or SEER rating.
  4. Buying the Cheapest Option Available – It may be tempting, but a cheap HVAC system is a bad idea if you want it to last and save you money in heating and cooling. Even a midrange system will save you money in only a few years with higher efficiency ratings.
  5. Picking the Same Model You Already Had – New models are stronger and more efficient. When possible, get an upgrade and your bills will reflect the difference.
  6. Waiting too Long to Buy – The longer you wait, the more you pay in heating and cooling bills for an old, worn down system. If you know you’re going to buy a new system, act fast to save the most possible money.
  7. Not Asking Questions – If you have a question, ask it. There is no such thing as a stupid question when looking for a new HVAC system.
  8. Ignoring Maintenance Recommendations – Maintenance recommendations are optional but almost always to your benefit. Research on your own before committing to anything, but don’t ignore the necessity either.

If you do things just right, your new HVAC system will last for years to come and provide steady, comfortable heating or cooling throughout that time. But, if you rush through things, make a hasty decision and neglect to do any research, you may have issues with your system in far less time than you’d like. Be smart and you’ll be rewarded.

Tags: , , ,
Posted in Air Conditioning, Heating | Comments Off