Posts Tagged ‘Furnace Replacement’

5 Reasons to Replace the Furnace in Your Manhattan Home

Wednesday, December 28th, 2011

Many Manhattan homes are heated with furnaces, since they generally provide safe and efficient heat.  Furnaces have also improved dramatically over the years as manufacturers find ways to make them more efficient. Even if your furnace has been reliable for many years, it may be worth the money to replace your old furnace with a newer, more efficient model.

Here are five major benefits to upgrading your furnace.

1. Lowering Your Utility Bills

Whether you realize it or not, your current furnace could be costing you more than it should in heating bills. If your furnace is 15-20 years old, it’s probably not heating your home as efficiently as the newer models with higher AFUE ratings. Even if your heating system has been replaced within the last ten years, the technology has advanced enough to consider an upgrade.

2. Fewer Repairs

Repair costs can add up if you are constantly repairing your furnace. Routine maintenance for your furnace can help reduce the need for repairs, but as furnaces age, they tend to need more repairs and replacement parts. If you need frequent repairs for your furnace, it may be time to replace it with a newer one.

3. More Consistent Heat

While maintaining consistent temperatures throughout your home involves several factors, such as insulation and thermostat control, your furnace could also be the reason you aren’t getting enough heat to all parts of the house. If some rooms are colder than others, or if your heating bills have recently gone up, it may be time for a furnace replacement.

4. Reduce the Chances of a Breakdown

When a furnace breaks down, it not only leaves you without heat, but it is also a major expense. Budgeting for a new furnace before it breaks down will put less financial burden on you than needing an emergency furnace replacement. Newer model furnaces are also more reliable and less likely to give you problems if maintained properly.

5. Safety

There’s higher potential for safety concerns with older or poorly maintained furnaces. In addition to fire hazards, carbon monoxide poisoning is another serious threat. When the heat exchanger stops working because it’s corroded or faulty, carbon monoxide can leak into the home. If you’ve had your furnace for more than 20 years, it could create safety hazards that you may be unaware of.

No matter how long you’ve had the furnace in your Manhattan home, it’s always wise to speak with a qualified HVAC technician about furnace upgrades, particularly if you have expensive heating costs. Call Standard Plumbing, Heating & Air Conditioning today to talk with one of our heating experts about furnace upgrades.

Tags: , , ,
Posted in Heating | Comments Off

Benefits of Replacing Your Furnace in Manhattan

Friday, December 2nd, 2011

You are about to make one of the largest purchases in your life – a new furnace for your Manhattan home. Maybe your old furnace is on life support and needs immediate replacement or you are looking for a better, more efficient furnace that will raise the comfort level of your home while reducing utility bills and carbon emissions.

If the furnace in your basement, crawl space, or attic is 15-20 years old, it may be a single-stage 80% percent efficient model, which doesn’t meet the higher efficiency standards of today’s models. It uses more energy, i.e. gas, oil, or electricity, to operate. And a single-stage furnace does not always provide even heating to all rooms in the home, based on the varying winter weather conditions. There may be large temperature variations from room to room.

Your new furnace will likely be more efficient and environmentally friendly than the one it is replacing – which are the two biggest benefits to replacing an old furnace. So, let’s take a closer look at these benefits, which link energy efficiency to the latest technology – namely two-stage furnaces and variable speed motors.

Two-stage furnaces start out by running in a first stage, which uses less than 70% of its capacity. This stage works well on moderate winter days. On colder days, the furnace will meet your extra heating demand by adjusting to the second stage in the heating cycle. Since the furnace spends most of its time operating in its lower capacity (first or single stage), it burns less fuel than a traditional furnace that always runs at full capacity and then shuts off when heating demand is met. You will see lower utility bills and a shorter payback period on your new furnace investment.

Variable-speed motors can actually save you money on your energy bill as they consume less electricity than standard motors. Variable speed furnaces save you money by having a higher SEER rating. SEER is the abbreviation for seasonal energy efficiency ratio. The higher the SEER, the more energy efficient the unit. The low operating costs of a variable speed furnace can allow you to run your furnace blower. With the low operating costs of the variable-speed furnace you can constantly run your blower without the worry of driving up your utility bill, allowing for continuously filtered air.

And when you shop for a new furnace, look for add-on equipment such as dehumidifers and programmable thermostats. Each will raise the comfort level you will be enjoying from your new furnace.

Tags: , ,
Posted in Heating | Comments Off

It’s Time for a New Furnace: Some Advice from Kansas

Monday, October 17th, 2011

Replacing your furnace is probably not something you want to think about in Kansas. After all, a new furnace is a big investment and not something you probably have too much experience with. And sometimes having your current system fixed or tuned up is all you need to get your home heating situation back on track. But there are certain situations in which it makes more sense to just go ahead and get a new furnace rather than simply patching up the old one.

For instance, if you have to call for either minor or major repairs to your furnace on a regular basis, it’s probably time to consider investing in a replacement. All of those repairs cost money and chances are that the furnace you’re paying repeatedly to replace isn’t going to last that much longer anyway.

Rather than continuing to dump money into a furnace that just isn’t cutting it anymore, you’ll be better off making the investment in a new unit. The truth is, you’re going to have to do it sooner or later and by buying a new furnace now, you’re actually saving all of the money you would have spent on repairing the old one for another year or so.

Also, a furnace that requires such frequent repairs is probably not functioning all that efficiently either. When you replace it with a newer model, you won’t just save money on repairs. You’ll also likely notice a considerable savings on your monthly energy bills because of how much more efficient your new model is.

Even if you haven’t been repairing your furnace often, you may be able to notice some signs that the old unit isn’t quite up to the task anymore. If you’re suddenly having some significant humidity problems in your house or if your home isn’t being heated evenly, there’s a good chance your furnace is on its way out.

And, in fact, even if your furnace is functioning just fine but is more than 10 years old or so, it’s very likely you’d benefit by replacing it. That’s because the newer furnaces available now are so much more energy efficient than their predecessors that the savings you’ll incur monthly will quickly make up for the initial installation investment.

Of course, you don’t want to get rid of a good furnace if you don’t have to. But if your furnace is getting close to the end of its expected lifespan, you may very well benefit by putting out the money for a new one now so you can start saving right away on your monthly energy bills.

Tags: , , , , ,
Posted in Heating | Comments Off