Bathtub Drain Plumbing: Things You Should Know in Manhattan

March 7th, 2012

When we think of clogged drains and plumbing problems in Manhattan, we most frequently think of toilets and kitchen plumbing, but one of the most common drains to cause problems in a home is the bathtub. To avoid drain and sewer repairs and to help fix any problems that might crop up, here are some tips for how to handle your finicky bathtub drain.

  • How the Bathtub Drain Works – A Bath tub drain works the same as the other drains in your home with a simple trap that ensures the safe transfer of water out of your home and blockage of sewer gasses from getting into your home. The drain itself is frequently open with a small crack – roughly a quarter inch – beneath a larger drain plug that can be lowered when you fill the tub. While the space is not large enough for objects like a bar of soap to enter, it is plenty large enough for hair, soap scum, and other small objects from a bath or shower to enter and start clogging that trap.
  • Cleaning the Drain – To cut down on how much hair and gunk actually gets into the drain you should take off the entire drain mechanism once a week and remove any excess hair. You should also use some form of wire device like a bent coat hanger or scrubber to reach in and remove any hair you can reach. There are specific plumbing devices to help with this as well, but a hanger works just fine assuming you do not have a heavy clog. It is also a good idea to run boiling water through your drain once every week to clear out any soap and hair build up. While most soap is water soluble, it can create a thick, greasy clog when combined with hair. Hot water can help to remove it before a clog occurs.
  • If a Clog Occurs – If a clog does occur, you should use the hot water method along with a plunger to try and clear out as much of the clog as possible. Avoid chemical use at all costs. Bathrooms are usually small rooms and even with the fan on, the fumes can be dangerous and the chemicals caustic on your pipes and tub. Baking soda and vinegar often help for small clogs, but otherwise, you should move on to a snake for physical clog removal.

If you have a clog deeper than the snake can reach or that you simply cannot affect with the tools listed above, it may be necessary to call a professional who can track your clog into the pipes and find where the root of the problem is. It might be just too deep in your drainage pipe or it could be a completely different area of your plumbing system.   Call Standard Plumbing, Heating and Air for more information.

Plumbing Problems You Can’t Fix Yourself in Manhattan

February 28th, 2012

In Manhattan there are some relatively simple plumbing maintenance jobs that most homeowners can handle with ease, and there are some plumbing problems that have a significantly higher degree of difficulty.

For these trickier or more extensive jobs, you really need to call in a professional. What kinds of projects are we talking about here?

Take for example a simple clogged drain. Whether it’s your tub or your kitchen sink, you’ve certainly encountered a clog over the years. Sometimes they are simple and easy to deal with, so you decide to tackle it on your own. First, you pour some commercial chemical drain clearing product down the drain. You let it sit for a while, like the instructions say, then run the water.

No luck—the drain is still clogged.

So, you try a pipe snake. You thread it down into the drain and through the pipe until it hits the clog. Then you pull back and…nothing. So you try again and again, really jamming the snag down in there to make it engage the clog, until…it breaks.

Now you’ve got a clog and a broken pipe snake in there.

So, you try more drain cleaner, but of course it doesn’t work again, and now the harsh chemicals are taking a toll on your pipes. You decide to just take the length of pipe out so you can see the clog, then remove it. Soon, you find yourself in over your head and you’re not sure how to replace the pipe.

Yikes. That’s a mess.

This isn’t to say you should never attempt to a plumbing repair on your own. Sometimes they are simple enough that the DIY option is the cheapest and best. However, if your efforts are coming up short and you’re about to enter unfamiliar territory, call Standard Plumbing. It will save time, money and headaches in the long run.

Benefits of Getting a Home Energy Audit in Manhattan Kansas

February 22nd, 2012

As a resident of Manhattan you may have heard of home energy audits, in which a professional inspects your home and tells you how “good” the insulation is. But you may also be wondering what the point of such an audit is. To answer that, here are four benefits of getting a home energy audit.

Learn About Loss

The main idea behind getting a home energy audit is to figure out the heat loss (or gain) of your home. That is, how much heat are you losing to the outside world? Heat that doesn’t stay in your home obviously does little to benefit you in terms of keeping your house warm, and can be costly in terms of increased utility bills and repair costs over time.

Identify Weak Spots

Aside from determining how much heat your home is losing, a home audit can also point you in the direction of weak or thin spots in your home’s insulation. By identifying areas that are letting out the most heat, you can prioritize your strategy to prevent heat loss. Most often, this starts with doors and windows.

Opportunity to Upgrade

A good home energy auditor will present you with solutions for your heat loss problems, like heating installation options or materials in your home. This can solve your heat loss problems in one fell swoop. Such solutions include energy efficient glass, new sealant around doors and windows or upgraded insulation, especially in upper floors.

Save Money

Preventing heat loss increases the efficiency of your heating system, which saves you money. Your heating bills are reduced, and your furnace has to run less, which means fewer repairs and a longer life for an expensive piece of equipment. In short, spending money on a home energy audit and heat loss solutions are sound investments.

The benefits of a home energy audit are numerous, which is all the more reason to take advantage of having one done in your home. Plus, it is also a good thing to do for the environment, which is part of being a responsible homeowner.  If you would like to schedule one please call Standard Plumbing, Heating and Air.

The Top Air Conditioning Brands on the Market in Manhattan

February 17th, 2012

So, it’s time to buy a new air conditioner. The first step is to determine which brand is right for you, but where do you start? There are dozens of brands out there and each has its own specific benefits to offer. Which selection will serve your family best? Let’s take a closer look.

What Type of Air Conditioning

The first question to ask is what type of air conditioning you want for your home. If you plan on installing a central system, your best bet is to go with a model from one of the traditional air conditioning manufacturers. Trane and Carrier in particular have been mainstays in the AC industry for decades.

Carrier and Trane provide some of the best products on the market and they both offer a wide variety of air conditioners ranging from low BTU split systems to full sized packaged systems for multi-room cooling (and sometimes heating too).

On the other hand if you want a mini splits air conditioner, the brand names you’re considering may be a little different. Since the mini splits technology is new to the United States, the most advanced systems come out of Japan. Mitsubishi and Sanyo in particular offer some of the best quality devices, complete with DC inverter technology allowing multi-zone cooling. Klimaire is another popular brand, though their systems are not as efficient for multi-room cooling with a single condenser.

Cost

While Trane and Carrier are among the best manufacturers, the cost of their systems tends to reflect this high standing. Goodman is a top choice for quality to cost ratio. Their systems are among the least expensive to buy through a distributor and they are less selective about installation so it is easier to find a contractor to install your unit. A lot of installers feel that the technology today makes the top brands hard to distinguish from each other – the real key is having the system properly sized and installed.

Top of the Line Systems

If you are interested in a high capacity system with expert installation, consider a Trane or Carrier system. If cost is an issue, look for a contractor who installs Trane, Carrier and Goodman products as Goodman offers some very good air conditioners without the premium price tag. For ductless mini-splits Mitsubishi offers the highest quality systems, though beware that you will pay a premium for that quality as well.  If you have any questions about this topic please call Standard Plumbing, Heating and Air.

Happy Valentine’s Day From Manhattan’s Oldest Plumbing, Heating & Air Conditioning Company

February 14th, 2012

Everyone at Standard Plumbing and Heating wishes you a Happy Valentine’s Day! Valentine ’s Day is all about showing your appreciation for your loved ones. Whether it is your significant other, your family, or your friends, today is a great day to let them know how special they are to you. A handmade card, a bouquet of flowers, or even a simple phone call can make someone’s whole day.

If you are thinking about a big gift for your family, an upgrade to your HVAC system might not be the most romantic gift, but it is a gift that keeps on giving! An air filter will keep you indoor air clean, and a new furnace or heat pump will make your home more comfortable and lower your utility bills. Making your home cozier is something your whole family will appreciate!

Call Standard Plumbing and Heating to learn more about how some HVAC system upgrades improve the comfort level in your home. And to make your Valentine’s Day a little sweeter, here is a recipe for Chocolate Covered Strawberries

INGREDIENTS:

16 ounces milk chocolate chips

2 tablespoons shortening

1 pound fresh strawberries with leaves

DIRECTIONS:

  1. Insert toothpicks into the tops of the strawberries.
  2. In a double boiler, melt the chocolate and shortening, stirring occasionally until smooth. Holding them by the toothpicks, dip the strawberries into the chocolate mixture.
  3. Turn the strawberries upside down and insert the toothpick into styrofoam for the chocolate to cool.

For more details, visit allrecipes.com.

Manhattan Heat Pump Tip: Outdoor Maintenance

February 13th, 2012

Sometimes, the trickiest part about owning a heat pump in Manhattan is keeping the outdoor components maintained. Because they are outside and generally out of sight, it can be easy to forget or neglect them. But because they are outside and exposed to the elements, heat pump maintenance is required to keep them running properly.

The two most important routine maintenance functions you can do as an owner of an outdoor heat pump are keeping it free of debris and keeping it level.

Every month or so, inspect and clean your outdoor heat pump to make sure it is free of leaves, dirt and other debris. These can easily be sucked in by the fan and reduce the efficiency of the whole system. Turn the power off to the unit and use a vacuum or broom to remove any accumulated debris.

Once or twice a year, use a carpenter’s level to make sure the whole thing is sitting level on the pad. Use the level to gauge both side to side and front to back. While you are doing this, check the insulation for erosion or gaps. If you see that it is not level or the insulation is wearing thin, have a contractor come out reset the unit on the concrete pad or patch up the insulation.

These are two small maintenance tasks that you don’t have to do very often, but they can make a big difference in the performance and life of your heat pump.

In addition, you should always have your whole heating, ventilation and cooling system inspected by a professional annually in order to keep everything maintained and in good repair.  If you have any questions about maintaining your heat pump please call Standard Plumbing and Heating.

Specs of EnergyStar Rated Heat Pumps for Manhattan Homes

February 10th, 2012

As a Manhattan resident you are almost certainly familiar with EnergyStar ratings. They are those little stars you see on a lot of common household appliances, like heat pumps. EnergyStar is a government program run by the Environmental Protection Agency and the Department of Energy to identify and clearly label products that meet strict efficiency guidelines. Products that carry the EnergyStar logo have been shown to be among the most highly efficient out there.

This labeling is important and arguably becoming more so every day. Homeowners want the peace of mind that comes with knowing that the appliances in their homes are running efficiently, helping the environment and saving them money.

But have you ever wondered how a product gets to wear that EnergyStar logo? What are the guidelines it has to meet or exceed in order to be approved?

The short answer is that it varies across product lines, as you might expect. An air conditioner is very different from a personal computer. For heat pumps, though, there are some pretty simple and consistent specifications to meet.

Heat pump ratings are based on two numbers—one for cooling and one for heating. Cooling efficiency is rated on a scale called the seasonal energy efficiency ratio, or SEER. This number simply describes in a nutshell how efficiently a unit can cool the area it’s installed in. Most heat pumps these days have a SEER of at least 10, and the most efficient ones carry a SEER of around 18. To meet EnergyStar requirements, a heat pump must carry a SEER of at least 14.

The second number involved in rating the efficiency of a heat pump is the heating season performance factor, or HSPF. This number describes the heating efficiency of a heat pump by dividing its estimated heating capacity by the amount of electricity it draws. Most new heat pumps have an HSPF of at least 8, which is what is required for EnergyStar approval.

A third rating criterion for heat pumps is the energy efficiency ratio, or EER. This is like SEER, except that it is an instantaneous measurement rather than one over a whole heating season. This rating is less commonly considered by consumers, but it is part of the EnergyStar criteria, so it’s worth mentioning. EnergyStar requires heat pumps to have an EER of at least 11.

Only when a unit meets or exceeds all three of these specifications is it eligible for EnergyStar approval. Keep in mind that the requirements vary for split systems versus single package systems, and that they may change over time. Contact Standard Plumbing, Heating and AC during the purchase process to be sure the unit you want is EnergyStar approved.

Steps to Take Before Turning on Your Furnace in Manhattan

February 8th, 2012

You are feeling a chill in the Manhattan air. The outside temperatures are going down each day and the nighttime temperatures are forcing you to break out the flannel pajamas, robes, and blankets. It’s getting cooler and you are holding off turning on your furnace for the first time of the season, maybe because you envision high utility bills or you are afraid of what you’ll hear, feel, or see coming from your furnace after several months of inactivity.

There’s not much you can do to control higher utility bills, they are like death and taxes. But there are some things you can do to take the “mechanical anxiety” out of turning on your furnace for the first time.

You can’t go back in time but you may want to consider “summerizing” your furnace after you shut it down in preparation for the cooling season – or during the cooling season. Have a qualified heating and cooling technician give your furnace an inspection and cleaning.

A preseason inspection and cleaning will prevent some problems that may affect some of your senses later on. For example, a smell coming from your furnace may indicate a burning or smoldering electrical component. A noise may indicate a noisy fan or a loose belt, causing poor or no airflow. Touching your ventilation system and feeling for any vibration can indicate poor airflow. Visually checking your instruments like thermostats for verifying proper temperatures or a digital readout on our carbon monoxide alarm for any traces of harmful gas are also important to furnace start-up.

If something goes wrong, don’t blame it on your thermostat or the cold weather; blame it on a lack of preventive maintenance. Your best bet is to have a qualified service technician do a clean and inspection – to minimize any surprises at start-up and to keep you and the occupants of your home comfortable and safe while your furnace begins another season of hard work.  If you have any questions about this process contact Standard Plumbing & Heating

How a Circulating Fan Can Save You Money and Help Your AC Keep You Cool in Manhattan

February 6th, 2012

If you already have a central air conditioning unit, you probably have not though much about having some ceiling fans put in as well. After all, why would you need a fan when your air conditioner can keep you as cool as you want all year long?

Well, the truth is that a ceiling fan can actually contribute a lot to your household even when you do already have the central air in place. It can also save you quite a bit of money when it comes to your monthly cooling costs, so there is really no reason not to look into getting a ceiling fan of your own.

Certainly the air that air conditioners distribute throughout your house is quite cool. But a ceiling fan will help to circulate it much more effectively. In fact, a good ceiling fan can make a room feel up to eight degrees cooler than it actually is just because of the cooling affect that moving air has on your body.

This means that you could set the thermostat on your air conditioner higher and still enjoy the same level of comfort that you are used to. You may already know that for every degree you raise your thermostat in the summer you will be saving up to 3% off of your regular energy bill. So if you can turn the air conditioning down by more than five degrees, you will surely be seeing some substantial savings.

Of course, you are still running the ceiling fan in place of the air conditioner, but the fan will use only a very small fraction of the energy that the air conditioner does. This all means that having a ceiling fan and using it wisely can help you cut your annual cooling costs dramatically.

And a ceiling fan will be useful in the winter as well. Since heat rises, you can turn your fan on backwards and it will push the heat that has risen to the top of your room back out along the walls and down. This means that you will be getting more for the heat you are paying for as well, making the ceiling fan a great money saver all year long.  Contact HVAC experts Standard for more tips anytime.

Manhattan HVAC Q&A: What is an Electric Furnace?

February 3rd, 2012

There are many types of furnaces that use a variety of energy sources to operate in Manhattan. Gas furnaces use natural or propane gas, boilers and radiators use water, heated by electricity. And then there are electric furnaces, which may have an advantage over other energy sources based on energy costs.

Simply put, electric furnaces function through the use of electricity. They do not require the use of any type of fuel – but function through wires and chords. An electric furnace uses heating coils, sometimes referred to as “resistance calrods” to create heat directly in the air flow. Inside the furnace cabinet are controls, a blower, and the circuit breakers for the heating elements. Some furnaces have the breakers accessible from the outside of the cabinet.

Other add-on accessories may include an electronic air cleaner, air filter, humidifier, high performance media filter, and air conditioning evaporator coil.

The heating process begins with the home’s thermostat. A drop in temperature is sensed by the thermostat, which alerts the electric furnace. The coil then warms up, thanks to the electric current that passes through it. The heated coil in turn heats the temperature of the air around it, which is then blown into the house through a blower. The pressure that is exerted by the blower on the heated air, warms it further. The blower is able to overcome the resistance of the duct work and replace unheated, colder air with the heated air. In most homes there are various return air ducts that are used to bring in the colder air to the furnace. This cold air travels through the furnace, through an air filter, the blower, and finally through the heat exchanger. After this it will then be pushed back into the house as warm air.

To maintain a supply of fresh air in the house, some furnaces also suck air from the atmosphere outside. After the air in the house reaches a particular temperature, the thermostat automatically shuts off the electric furnace.

An electric furnace may be less costly to run, depending on the price of electricity versus other sources like natural gas, propane gas, or oil. Gas and oil are fossil fuels and burning them leaves a “carbon footprint” – the release of carbon compounds and gases into the atmosphere. An electric furnace does not burn fuel and thus does not leave a carbon footprint. This electric warming process results in fewer particulates and contaminants in the air, too.  For more information about electric furnaces and other heating appliances call your HVAC pros at Standard Pluming and Heating.