Archive for the ‘Indoor Air Quality’ Category

The Goal of Indoor Air Quality Testing for Manhattan Homes

Monday, May 7th, 2012

If you are concerned about the air quality in your Manhattan home, the first step is thorough testing for allergens, pollutants and other potentially harmful irritants in your air. But, what type of testing do you need and how should you order it? Here is a breakdown of what you can test for and why those tests are so important.

Mold Testing

If you suspect mold or recently moved into a new home that had water damage in the past, seriously consider mold testing. While the process is relatively extensive, the benefits are numerous. Most testing involves checking every potential surface and inlet for water sources and mold spores in your home. Dozens of samples are taken and tested in a lab for traces of mold and specific write ups are made of any areas affected by mold so treatment can be done.

Asbestos

Asbestos is most common in old insulation in walls, attics, basements or around pipes. Testing can be done to check if asbestos is present and if it is, the old insulation can be wrapped to ensure it doesn’t cause any damage to your family’s health.

Duct Work

One of the most common problems you will find in a home that hasn’t been tested for indoor air quality problems is the ductwork. Dirty ducts can be filled with debris, dust, mold, droppings and dozens of other things that you continuously breathe day after day. Testing involves video inspection and measurement for common allergens and pollutants.  Duct cleaning is a sure way to improve indoor air quality.

General Pollutants

There are a number of other pollutants that can build up in your home. From lead paint flakes in the air to common allergens like dust, pollen and dander floating freely in your ductwork, pollutants build up over time and need not only to be tested for but removed. Smoke from cigarettes or outdoor pollutants can also be removed from your home after successful testing with the right air cleaning technology.

A good indoor air quality test will measure the levels of each of these contaminants and provide a clear breakdown of how to go about removing them.  Please call Standard Plumbing, Heating and Air to schedule your testing today.

Tags: , ,
Posted in Air Quality in Your Manhattan Home, Duct Cleaning, Indoor Air Quality | Comments Off

IAQ – Ultra Violet Lighting: A Guide From Kansas

Friday, September 2nd, 2011

With a state of the art Kansas home comfort system in place, complimented by a high tech indoor air cleaner, you may think you’re set to take on climate and contaminant related challenges to your air quality. But you’re probably missing one thing, and that’s the ability to remove living contaminants like bacteria and viruses from your indoor air.

Unlike non-living particulate indoor air contaminants, bacteria and viruses are not easily caught by indoor air filters or ionizers. They often slip through and continue to circulate again and again through your home, greatly increasing the likelihood that you and your family will get sick. They also tend to reproduce, so the longer you go without eliminating these germs, the more of them there will be.

Killing those Germs for Good

Fortunately there is a technological solution to this indoor air quality problem. The inclusion of ultra violet lights into your air purification system not only specifically targets bacteria and viruses; it helps to slow the spread of disease when someone in your home gets sick.

UV germicidal lights are extremely effective at removing all types of living contaminants from your indoor air. Unlike HEPA filters and air ionizers, UV germicidal lights don’t try to remove these contaminants by trapping them. Instead, they kill them outright, making sure that the germs can’t stick around to reproduce or work their way free of the containment system.

Installation and Maintenance

For most indoor air contaminants, you want to have someone test your air first. However, with bacteria and viruses, you can rest assured that they are always in the air around you. It often only takes a smaller number of pathogens to make someone ill.

Most UV germicidal lights are easy to integrate into your existing indoor air cleaning system. They are usually installed just past the filters so they can catch the germs without other indoor air contaminants getting in the way. And best of all, UV germicidal lights require very little attention or maintenance.

Simply put them in place and let them do their work. You should schedule a routine maintenance visit every so often to make sure that no part of your indoor air cleaning system needs to be repaired or replaced. But other than that, installing UV germicidal lights in your home allows you to relax and enjoy a completely contaminant free living environment.

Tags: , ,
Posted in Indoor Air Quality | Comments Off

Important Indoor Air Quality Tips When Remodeling in Manhattan

Friday, August 26th, 2011

Remodeling your Manhattan home is a big step. As you plan the layout of your new bathroom or the size of the bedroom being added to the second floor, make sure you take into account the effects your changes will have on the indoor air quality of your home. Here are some specific things to keep in mind:

  • Water and Moisture – When you build on to or remodel your home, one of the most common problems is excess moisture. The grade may not be built to handle the extra space or you may find that moisture is harder to block from your home than expected. However, it’s vital that any additions are as water tight as the original construction. Mold and mildew, as well as dust mites and other humidity and moisture borne pollutants are major health concerns.
  • Ventilate Properly – Most people assume that the best thing they can do is close their home up tightly to block out pollutants. But, indoor air can be as much as 100 times more polluted than outside air if it isn’t properly cleaned. Stagnant, stale air filled with dust, pollen and dander among other things is not healthy, so extend your ventilation system to support your new addition.
  • Proper Flooring – The floor you choose when remodeling has a major impact on indoor air quality. You want to ensure any water that gets on the floor, especially in bathrooms can be removed without it penetrating to the wood underneath. Properly sealed tiles and fixtures are a must.
  • Unsafe Building Materials – Modern materials are generally safe, but if your home was built before 1978, consider the risk of flaking paint or old insulation before you start demolishing a room for remodeling. Lead paint in window frames and doors can be a major risk if it flakes and enters the air and asbestos can be found in insulation in walls, wiring and pipes.

Remodeling is a big step, and likely you have a lot of things on your mind, but don’t forget to include the air quality in your calculations, both during and after the construction. The EPA has a fantastic resource on indoor air quality in home remodels to help you determine what things you should watch for in each room of the house as you make changes.

Tags: ,
Posted in Indoor Air Quality | Comments Off

5 Ways to Improve IAQ and Reduce Air Pollution: A Tip From Kansas

Wednesday, August 24th, 2011

Your Kansas home could be a haven for pollutants that can cause irritation to the upper respiratory system of anyone who comes inside. These allergens and pollutants are easy to remove however by taking some simple steps such as the five listed below:

  1. HEPA Filtration – Step one is to use HEPA filtration to remove as much of what is on the floor as possible through vacuuming. HEPA vacuum cleaners can remove years of cleaners, solvents, dander, mineral build ups and other toxins that tend to accumulate in spaces that normal vacuums cannot reach. It may be a bit of an investment, but a high powered vacuum cleaner can have a tremendously positive impact on your lifestyle and reduce pollutants.
  2. Stop Outside Stuff from Coming In – Some of the worst pollutants your home will face are from outside. So, make sure you have doormats at every door and that your family and friends remove their shoes before coming inside. You can have a second mat inside as a friendly reminder that cleaning the shoes is not an option but a strict necessity.
  3. Humidity Helps – Humidity levels between 30% and 50% reduce the presence of dust mites, molds, bacteria and many other indoor pollutants. Air conditioning in the summer is helpful to reduce humidity, though a dehumidifier is recommended for those days when the temperature doesn’t justify full blown air conditioning. Additionally, look for sources of excess humidity like leaky pipes, standing water, or clothes drying.
  4. Radon Testing – We’ve recently discovered that Radon is the second leading cause of lung cancer in the United States each year and can be present in almost any home. It is not a location specific pollutant, so it’s important to have your indoor air tested for Radon as soon as you move into a new home. Once testing is done, have any problems repaired immediately.
  5. Cut the Chemicals – There are a number of high quality household cleaners that don’t contain chemicals. Avoid ammonia, bleach and other chemical laden cleaners that can inflame allergies and pollute the water supply. Your home will be just as clean and you won’t feel uncomfortable afterwards.

Proper cleaning and careful selection of compounds and what goes into your air will help you avoid creating new air quality problems in the house. Done right, this process will make everyone in your home feel more comfortable.

Tags: ,
Posted in Indoor Air Quality | Comments Off

Heat Recovery Ventilator – What Is It and When Do You Need It?

Friday, July 29th, 2011

While the design of modern homes is to retain as much energy as possible while minimizing the cost of heating and cooling, that very design can have a negative impact on your indoor air quality. Because air cannot pass freely between indoor and outdoor environments, you are stuck breathing the same air day after day.

Luckily, there are t options that will exchange the heat in your indoor air to the outdoor air as it enters your home. In effect, you can retain all of the heat your home produces each day before it leaves the house. It works equally well in the summer to retain the cooled air your air conditioning units produce.

How Heat Recovery Works

Heat recovery ventilators come in many forms, including simple ventilation, heat exchange, or air exchanging. There are even some indoor heat pumps that will carefully draw heat from the air as it’s removed from your home and recirculate it through your air ducts.

The idea is the same no matter how the system is installed. As air leaves your home through a ventilator, a counter-flow heat exchanger transfers energy between the air leaving and entering your home. So, instead of warm air leaving and cold air entering, the air coming into your home takes the heat from the air leaving your home. Air comes and goes, but heat stays inside.

In the summer, the same system works in reverse to remove heat from the air coming into your home and keep it outside. The one thing to keep in mind with a heat recovery ventilator is that it doesn’t retain the humidity in your home as an energy recovery ventilator would. If you live in an area with very high or very low humidity during summer or winter, an ERV may be a better solution for your needs.

Air Quality Benefits

The goal of a good heat recovery ventilator is not just to retain the heated or cooled air in your home. It is also to ensure you have clean, fresh air to breathe each day. Most people don’t realize, but when you don’t circulate your air and your home is sealed up with enhanced weather-stripping and high quality insulation, unwanted contaminants begin to build up. A heat recovery ventilator makes sure you not only get fresh air, but that it’s properly filtered and the heat or cooling your comfort system produces is retained. No money is lost, energy is saved, and your family stays comfortable and healthy – everyone wins.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

Understanding House Ventilation Options

Wednesday, July 27th, 2011

All the fancy air quality control tools in the world are useless if you don’t have a good ventilation system to circulate air through your home each day. An air filter removes larger particles like dust, dander and pollen, and an electronic air filter removes smaller particles like bacteria, mold, and gases. However, your indoor air will still be poor without a fresh supply of air constantly circulating in from outdoors.

Types of Ventilators

There are a few options here, depending both on the number of contaminants your home has and the amount of heated or cooled air you are willing to lose each day through vents.

The simplest method is an exhaust fan. Fans blow air from your home, creating a negative pressure zone inside. Air inlets then allow new air to enter your home and equalize that pressure. There are also balanced exhaust fans – one fan blowing indoor air out and another fan pulling fresh air in. If you have open flames or gas burning appliances, a balanced exhaust fan is necessary to keep the flames from going out due to the negative pressure caused by a single outlet exhaust fan.

Traditional ventilation, while simple, is also inefficient. In the middle of winter it blows all of your heated air outside and in the summer, it does the same to your cooled air. Your home comfort system likely can keep up with the loss of heat or cooling, so you won’t be less comfortable, but you will certainly pay more on your energy bill.

That’s why heat and energy recovery ventilators are popular in many homes. Especially if you went to the trouble of having your home sealed up tightly to minimize energy loss, these ventilators will save you money.

When air is ventilated through a recovery unit, the energy and heat is transferred between indoor and outdoor air as it passes. In the winter, this means the energy in your indoor air is retained and during the summer, the energy in outdoor air is removed before it enters your home.

Which Method is Best?

The method you choose will depend largely on your current cost of heating and cooling and what types of contaminants you face. Energy recovery ventilators have the added benefit of patching directly into your indoor air quality units, so you won’t need to worry about new contaminants coming in either.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

How a Thermostat Works

Monday, July 25th, 2011

Your thermostat is designed to closely monitor and maintain the temperature in your home. When you flip the switch, you want your furnace or air conditioner to respond immediately. So, it’s a good idea to learn how it works so that if there is a problem, not only will you know better what needs to be fixed – you can decide whether to call a professional in for help.

Thermostats shouldn’t need input from you other than to set the initial temperature. From there, they are automatic switches. A thermometer inside the thermostat measures the indoor air temperature. When it gets above or below the limit you’ve specified, it triggers the thermostat to send a message to your home comfort system and keep things nice and comfortable.

Types of Thermostat

Thermostats come in two forms –electromechanical and electronic. An electromechanical thermostat is the simplest and has been used for decades to regulate temperature in homes. It has a simple strip or coil of metal that expands as the temperature rises and contract as it lowers. A mercury thermometer is placed on top of the strip. The coil’s movements cause the vial to tip as the temperature changes. There is a pair of electrical contacts on either end of the vial. The mercury can absorb that electrical current when the electrical contacts touch the thermometer. The mercury then acts as a switch to turn on your comfort system.

An electronic thermostat simply has an electronic sensor that measures the indoor air temperature. You set a temperature for your room and when it changes significantly, the switch inside your electronic thermostat is triggered, causing it to turn on your comfort system.

Ways to Upgrade Your Thermostat

Most homes only need the bare minimum in their thermostats. However, there is some very exciting technology on the market these days that can add quite a bit of value to your system. Not only can you install a programmable thermostat, you can opt for zone control systems that allow multiple thermostats in different rooms of your home.

Programming allows you to set temperatures for certain times of the day. This is especially great if you are gone from the house for long periods of time each day. Why heat or cool a home when it is empty? And if you have multiple people with different temperature needs, zone control temperature control allows you to set specific temperatures for specific rooms in your home – a very enticing option for large families or multi-story homes.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

Humidification/Dehumidification

Wednesday, June 1st, 2011

Most people don’t think much about the humidity in their home unless it gets unbearably high in the summer or extremely low in the winter. However, even slightly low or high humidity levels can have a huge impact on your indoor air quality, so even if you feel comfortable most of the time, a humidifier or dehumidifier is something you should look into. Many homes have humidity problems, and even if it’s not something you notice on a regular basis, air that’s too moist or too dry can have a large impact on your family’s health and the overall quality of your indoor air.

The Risks of High and Low Humidity

There are many reasons that proper humidity in your home is so important. For one thing, air that’s too humid promotes the growth of things like mold and dust mites that are significant airborne allergens. Without enough moisture, however, mold and dust mites can’t grow, so if you keep your indoor humidity below 50%, you’ll likely never need to worry about these allergens disrupting your family’s health or causing damage to your furniture.
But, dry air isn’t much better. Once the humidity level gets below 35%, a number of negative things can happen. Dry air enhances the symptoms of asthma, colds and allergies, and it causes damage to the wood fixtures and furnishings in your home. Even if it doesn’t do so much damage, dry air is simply uncomfortable, causing dried out skin, eyes, and hair.

Why Humidity Control Matters

Even if you have a state of the art air quality system installed in your home, humidity is very much something you need to be concerned about. Air that’s too moist or too dry can actually make it more difficult for indoor air cleaners and filters to get those contaminants out. In effect, poor humidity control makes every aspect of your air quality worse.

So if you want to be sure you’re getting the most possible out of your indoor air cleaner, the best thing you can do is put in a good humidification system as well. And when you’ve done that, you may even find that you can turn down the heat and air conditioning as well. Properly humidified air makes home heating and cooling more efficient, saving you both money on your monthly energy bill and wear and tear on your system. No matter how you look at it, proper humidity control is good for you and your home.

Tags: ,
Posted in Indoor Air Quality | Comments Off

What Is a Whole House Pressurization Test and Should I Get One?

Monday, May 30th, 2011

If you have a forced air heating or cooling system in your home, you also have a system of ducts through which that heated or cooled air circulates. And most people don’t give a second though to those ducts. After all, if your heating and cooling systems are working, the ducts must be doing their job, right?

Unfortunately, that’s not always the case. If ducts are not working properly, the whole system will be in trouble, even when you don’t realize there is a problem. That’s why a pressurization test is so important – it provides peace of mind knowing that your home’s ductwork is not only properly installed, but that it doesn’t need any special repairs.

Why Pressure Matters

Your duct system depends on proper pressurization to evenly and efficiently distribute air throughout your home. Leaks, cracks or clogs in the system can disrupt that pressure and lead to uneven or inadequate movement of air through your ducts. This causes problems you may not notice, so if you haven’t had your ducts checked for proper pressure in a while, it’s worth looking into.

Improper pressurization causes symptoms like hot or cold spots in your home or an overall drop in the effectiveness of your home heating and cooling system. When loss of pressure is due to a leak that lets in unfiltered air from outdoors it can also lead to a decrease in indoor air quality. Often these symptoms are easy to ignore. But by doing so, you only allow the situation to get worse.

A whole house pressurization test is the best way to determine the state of your home duct system. By using high tech diagnostic equipment, home HVAC professionals check over your entire system to determine whether you have a pressurization problem. If so they can then quickly pinpoint the source. Once that’s done, the repairs are usually quite simple and you’ll get much more out of your home heating and cooling system than you did before.

Even if no symptoms of improper pressurization in your ducts have presented themselves, it’s worth having one of these tests performed. Especially if you don’t know when the system was last checked, a whole house pressurization test can help uncover small problems before they turn into bigger ones. And the peace of mind this provides is well worth the day it takes to perform the test.

Tags: ,
Posted in Indoor Air Quality | Comments Off

Control Your Home’s Moisture – Humidity Is Key

Friday, May 27th, 2011

Most people don’t give a second thought to humidity until it is either much too high or uncomfortably low. And if you have a state of the art home comfort system, you’re probably comfortable inside all year long anyway. But there are several reasons to pay attention to the humidity level in your home and take action if you realize that it isn’t providing the comfort level you’ve come to expect.

Many problems arise from excess or inadequate indoor humidity levels. For instance, a lack of humidity causes your skin and nasal passages to dry and crack, which is obviously pretty unpleasant. But air that’s too dry can also make the symptoms of allergies, asthma and colds worse. Anyone in your home suffering from these conditions will be much more comfortable when the right level of humidity is restored. Another great benefit is that the indoor air quality will no longer contribute to longer and more sever colds and flus in the winter.

Too much humidity is a problem too, though. It promotes the growth of mold, which is a big contributor to indoor air pollution. Mold spores are a big time allergen. The more moisture there is in your home, the more mold there’s likely to be. High indoor humidity levels also promote the growth of dust mites, another major indoor air contaminant and allergen.

Of course, you probably have a great indoor air cleaner in place to get all of those contaminants out of your home’s air supply. But if the air inside your home is too moist or too dry, it can actually make it harder for the air cleaner to remove all types of contaminants. Not only are you putting a greater strain on your body and immune system, you’re asking your air cleaners to work much harder, which can cost you money in repairs and filter replacements.

For all of these reasons, it’s important to put in a humidification system to maintain the overall quality of your indoor air. Plus, a properly humidified environment is simply more comfortable to live in. A humidifier can easily be integrated into your current home heating and cooling system, so you don’t have to worry about high installation costs or equipment compatibility. All you have to do is sit back, relax and breathe in the fresh air that your humidification system makes possible.

Tags: ,
Posted in Indoor Air Quality | Comments Off